Setting Up Vlans - Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual

Traffic control

8.6.3 Setting up VLANs

V Select the Switching:VLAN:Static dialog.
To set up VLANs, you first specify the desired VLANs in the VLAN static
table:
V After clicking on "Create", you enter the appropriate VLAN ID. A new
line appears in the table.
V Enter the name of your choice for this VLAN.
V Define the affiliation of the ports you require.
- not a member of the VLAN.
M a member of the VLAN - packet is transmitted with tag .
F not a member of the VLAN even not dynamically via GVRP.
U a member of the VLAN - packet is transmitted without tag.
V After setting up VLANs, you specify the rules for received data in the
VLAN Port table (port):
D
VLAN ID
specifies to which VLAN a received untagged data packet is assi-
gned.
D
Acceptable Frame Types
detemines if data packets can also be received untagged.
D
Ingress Filtering
specifies whether the received tags are evaluated.
124
Layer 2 Enhanced with Layer 2 Professional
8.6 VLANs
Release 1.0 10/05