Traffic control
Note: Save the VLAN configuration to non-volatile memory
(see Fig.
44).
Note: The 256 available VLANs can use any VLAN ID in the range 1 to
4042.
Note: In a HIPER-Ring with VLANs you should only operate devices
with the software that supports this function, namely:
D
Power MICE
D
MICE Rel. 3.0 and higher
D
RS2-../.. Rel. 7.0 and higher
D
RS2-16M Rel. 7.1 and higher
D
MACH 3000
Note: In the HIPER-Ring configuration, select for the ring ports
– VLAN ID 1 and "Ingress Filtering" disabled in the port table and
– VLAN affiliation U in the static table.
Note: In the Ring/Network Coupling configuration, select for the cou-
pling and partner coupling ports
– VLAN ID 1 and "Ingress Filtering" disabled in the port table and
– VLAN affiliation U in the static table.
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05
8.6 VLANs
123