Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual page 162

Setting up DHCP Server and TFTP
V Enter the network mask and click on Accept.
Fig. 59: Network mask in the configuration profile
V Select the Boot tab page.
V Enter the IP address of your tftp server.
V Enter the path and the file name for the configuration file.
V Click on Apply and then on OK.
Fig. 60: Configuration file on the tftp server
156
A.1 Setting up DHCP/BOOTP Server
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05