Installation Between Base & Wall Cabinets; Installation At End-Of-Run; Frameless Cabinets; Accessory Panel Kits - Monogram ZIS36N Custom Options Manual And Installation Instructions

Installation Examples
Installation
Between
Base &
Wall Cabinets
Note: 1/4" thick side panels can be
inserted into the case trim, making the
rough-in the same as the outside trim
width, 36".
Installation
At End-of-Run
Note: 1/2" thick side panels shown. Side panels can
be any thickness. Add side panel thickness to outside
trim width (36") to calculate the rough-in dimension.
The leading (front) edge must be finished to match
surrounding cabinetry.
Frameless
Cabinets
Accessory
Panel Kits
Side panels are required whenever the sides of the refrigera-
tor will be exposed.
1/2" to 3/4" side panels are normally set into place and
fastened to adjacent cabinetry or to the back wall before
rolling the refrigerator into the opening.
Roughed-In Dim.
Finished Dim.
Roughed-In Dim.
Side panels, 1/2" minimum thickness are
required when using frameless cabinets.
The side panel acts as a spacer between the
cabinet and the case trim and prevents
interference with cabinet door swing. The
leading (front) edge must be finished to
match surrounding cabinetry.
Field installed door and grille panels are required. The factory
installed trim will accept accessory panel kits. White or black
®
Lexan and stainless steel kits are available. Panels are cut to
size and ready to install. These panel kits must be ordered
separately.
Model Black White
ZIS36N ZWBP36 ZWWP36
ZISW36D ZWWP36D
ZISB36D ZWBP36D
Design Information
Therefore, the rough-in dimensions must allow for side panel
thickness. In both a flush and semi-flush installation, the
finished dimension, (the width of the opening after side panels
are installed), must accommodate the full width of the
refrigerator.
See page 14 for side panel sizes.
Flush and Semi-Flush
Installations
1/4" Thick
Side Panels
Finished Dim.
35-1/2"
36"
Flush and Semi-Flush
Installations
1/2" Thick
Side Panels
36"
37"
1/2" To 3/4" Side Panels. Leading
Edge Flush With Cabinet
A wide range of custom appearance options can be created
with optional custom trim kits. See the opposite page for
examples and trim kit descriptions.
Stainless
ZWSP36
ZWSP36D
ZWSP36D
36" Built-In Refrigerators
Refrigerator
Cabinet
Refrigerator door
Cabinet
1/4" Side Panels. Insert end of
side panel into trim
Refrigerator
Cabinet
Refrigerator door
Cabinet
1/2" To 3/4" Side Panels. Leading
Edge Flush With Cabinet
Refrigerator
Refrigerator door
Cabinet
4