Table of Contents
Advertisement
Setting [RGB2 INPUT SETTING]
1)
Press as to select [RGB IN].
2)
Press the <ENTER> button.
f The [RGB IN] screen is displayed.
3)
Press as to select [RGB2 INPUT SETTING].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[RGB/YP
P
]
B
R
[Y/C]
[VIDEO]
[DVI-D IN]
Switch the setting when the external device is connected to the <DVI-D IN> terminal of the projector and the image is not projected correctly.
1)
Press as to select [DVI-D IN].
2)
Press the <ENTER> button.
f The [DVI-D IN] screen is displayed.
3)
Press as to select [EDID].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[EDID3]
[EDID1]
[EDID2:PC]
5)
Press as to select [SIGNAL LEVEL].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[0-255:PC]
[16-235]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The data for Plug and play will change when the setting is changed. Refer to "List of compatible signals" (x page 144) for a resolution that
supports plug and play.
[HDMI IN]
Set the signal level when HDMI input is selected.
1)
Press as to select [HDMI IN].
2)
Press the <ENTER> button.
f The [HDMI IN] screen is displayed.
3)
Press qw to switch the [SIGNAL LEVEL] item.
f The items will switch each time you press the button.
[AUTO]
76 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Select when inputting RGB signals or YC
Select when inputting luminance signals and color signals to the <RGB 2 IN> terminal.
Select when inputting video signals to the <RGB 2 IN> terminal.
Recognizes movie-based video signals and still image signals automatically.
Select mainly when an external device that outputs movie-based video signals (such as a Blu-ray disc
player) is connected to the <DVI-D IN> terminal.
Select mainly when an external device that outputs still image video signals (such as a computer) is
connected to the <DVI-D IN> terminal.
Automatically sets the signal level.
Select when the DVI-D terminal output of an external device (such as a computer) is connected to the
<DVI-D IN> terminal.
Select when the HDMI terminal output of an external device (such as a Blu-ray disc player) is
connected to the <DVI-D IN> terminal via a conversion cable or similar cable.
Automatically sets the signal level.
C
/YP
P
signals to the <RGB 2 IN> terminal.
B
R
B
R
Advertisement
Table of Contents
