How To Install And Remove The Projection Lens (Optional) - Panasonic PT-DW10000U Operating Instructions Manual

How to install and remove the projection lens (optional)

Adjust the lens shift position so that it is at the home
position (p. 38) before installing or removing the
projection lens.
Note
• Remove the dustproof sponge from the lens fitting
of the projector before installing the projection lens.
(Keep the dust-proof sponge in a safe place for later
use if needed.)
• After removing the projection lens, install the
dust-proof sponge to the lens fitting of the projector
in order to stop dust from getting inside the
projector.
How to install the
projection lens
1. While pressing the projection
lens cover lock button, pull the
cover forward to remove it.
Projection lens cover lock button Projection lens cover lock button
2. Align the mark (orange) on the
projection lens with the mark on
the projector (
the lens and turn it clockwise
until it clicks into place.
OPEN OPEN
FILTER FILTER
CLEANING CLEANING
CLOSE CLOSE
), and then insert
Mark (orange) Mark (orange)
3. Push the projection lens cover in
until it clicks into place.
How to remove the
projection lens
1. While pressing the projection
lens cover lock button, pull the
cover forward to remove it.
Projection lens cover lock button Projection lens cover lock button
2. While holding down the
projection lens lock button,
turn the projection lens counter
clockwise, and then pull it off.
Projection lens lock button Projection lens lock button
OPEN OPEN
FILTER FILTER
CLEANING CLEANING
CLOSE CLOSE
33
ENGLISH –