Usb Media Player Settings - Panasonic TH-55VF1HU Operating Informations

■
DIGITAL LINK menu
Displays the setting menu of Digital Interface Box.
Select [DIGITAL LINK menu] with
<ENTER>.
Note
●
This function can only be selected when the
Panasonic device that supports DIGITAL LINK output
(ET-YFB100G, ET-YFB200G) is connected to a
DIGITAL LINK / LAN terminal and its power is on.
●
For details, refer to the manuals of the devices that
support DIGITAL LINK output.
■
[AMX D. D.]
Set whether to allow the Display to be detected by AMX
Device Discovery.
[On]:
Enables detection by AMX Device Discovery.
[Off]:
Disables detection by AMX Device Discovery.
●
For more details, visit the following web site.
http://www.amx.com/
■
[Crestron Connected™]
When this function is set to [On], the Display can be
monitored or controlled via the network using equipment
and application software of Crestron Electronics, Inc.
This Display supports the following application software
from Crestron Electronics, Inc.
RoomView Express
• ®
Fusion RV
• ®
RoomView Server Edition
®
•
[Crestron Connected™] is a function to connect to
a system developed by Crestron Electronics, Inc.
which manages and controls multiple system devices
connected to the network.
● For details of "Crestron Connected™", refer to the
Crestron Electronics, Inc. web site (Provided only in
English).
http://www.crestron.com/
For the download of "RoomView
the Crestron Electronics, Inc. web site (Provided only
in English).
http://www.crestron.com/getroomview
■
[Extron XTP]
Set to [On] when connecting XTP Transmitter made by
Extron to DIGITAL LINK terminal.
●
For more details on Extron, visit the following web
site.
http://www.extron.com
72
English
and press
Express", refer to
®
■
[USB memory network settings]
Sets whether to permit the network setting using the
USB memory device. (see page 109)
[Permit]:
Permits USB memory network settings.
[Prohibit]:
Prohibits USB memory network settings.
Note
● This function is set to [Permit] as factory default.
●
Once the network setting is done with USB memory
device, this function is set to [Prohibit].
■
[Reset]
You can reset the network setting to the factory default
of the Display.
Select [Yes] with and press <ENTER>.
Network settings
Reset
Yes No

USB media player settings

Set for [USB media player] function.
[USB media player settings] - submenu screen
USB media player settings
USB media player
Video playback mode
Resume play
Scenario file check
No scenario file
Slide show duration
■
[USB media player]
Set to enable or disable the [USB media player] function.
■
[Video playback mode]
Sets the video playback mode.
If image disturbance occurs at the switching timing of
motion picture files during playback in the Standard
mode, switch to the Adjust mode.
[Standard]:
Plays without a black image at the joint between
video files.
[Adjust]:
Plays with a black image (approx. 2 seconds) inserted
at the joint between video files.
Note
●
The mode switching is enabled only when using the
single media player.
●
The display may be disturbed at the switching timing
of files during playback in the Standard mode.
Enable
Standard
On
10 sec