Before Connecting - Panasonic TH-55VF1HU Operating Informations

10 COMPONENT /
RGB /
VIDEO IN:
11 AUDIO2 IN:
12 AUDIO OUT:
13 EXT SP:
18
English
COMPONENT / RGB Video
Input Terminal (R/P /C
R R
C , G/Y)
B
Connect to video equipment
with "YP P / YC C " or "RGB"
B R B R
output.
(see page 25)
Composite Video Input
Terminal (VIDEO)
Connect to video equipment with
Composite signal output.
(see page 24)
Audio Input Terminal shared
with COMPONENT/RGB IN and
VIDEO IN
(see page 24, 25)
Analogue Audio Output
Terminal
Connect to audio equipment with
analogue audio input terminal.
(see page 28)
Speaker Terminal
Connect to external speaker.
(see page 29)

Before connecting

, B/P /
B
● Before connecting cables, carefully read the operating
instructions for the external device to be connected.
● Turn off the power of all devices before connecting
cables.
● Take note of the following points before connecting
the cables. Failure to do so may result in
malfunctions.
When connecting a cable to the unit or a device
•
connected to the unit itself, touch any nearby
metallic objects to eliminate static electricity from
your body before performing work.
Do not use unnecessarily long cables to connect
•
a device to the unit or to the unit body. The
longer the cable, the more susceptible to noise it
becomes. Since using a cable while it is wound
makes it act like an antenna, it is more susceptible
to noise.
When connecting cables, connect GND first, then
•
insert the connecting terminal of the connecting
device in a straight manner.
●
Acquire any connection cable necessary to connect
the external device to the system that is neither
supplied with the device nor available as an option.
●
If the outer shape of the plug of a connection cable
is large, it may come in contact with the plug of an
adjacent connection cable. Use a connection cable
with the suitable plug size for the terminal alignment.
●
If video signals from video equipment contain too
much jitter, the images on the screen may wobble.
In this case, a time base corrector (TBC) must be
connected.
●
When the sync signals output from PC or video
equipment are disturbed, for example, when changing
settings of video output, the colour of the video may
be disturbed temporarily.
● The unit accepts Composite video signals, YC
YP P signals, analogue RGB signals and digital
B R
signals.
●
Some PC models are not compatible with the unit.
● Use cable compensator when you connect devices to
the unit using long cables. Otherwise the image may
not display properly.
●
Refer to "Preset Signals" (see page 112) for the types
of video signals that can be displayed with the unit.
C /
B R