Recall; Volume Adjustment; Sound Mute On / Off - Panasonic TH-55VF1HU Operating Informations

RECALL

It is possible to check the setting status of input label,
picture mode, etc.
Press <RECALL>.
Current setting status will be displayed.
10:00
Off timer
1 Input label
2 Aspect mode (see page 37)
3 Backup input change (see page 60, 62)
4 Audio input (see page 78)
5 Profile name (see page 48)
6 Multi dynamic backlight (see page 53)
7 Off timer remaining time (see page 36)
8 Clock / Mute (see page 35)
● When there is no video signal to the selected input,
[No signal] is displayed for about 30 seconds at the
end.
● When a USB memory is not connected to the USB
terminal at the time of using the USB input, [No
external media] is displayed for about 30 seconds.
Even when a USB memory is connected, if it does not
contain any playable file, [No play file] is displayed at
all times.
●
To display the clock, set [Date and time], and then set
[Clock display] to [On]. (see page 69, 80)
PC
16:9
Backup mode OK
AUDIO1 IN
Memory name: MEMORY2
MDB:Parent
90 min

Volume Adjustment

Press <VOL +> <VOL -> or <+ (Unit)> <- (Unit)> to
adjust volume.
Unit
1
2
3
4
5
6
Volume (Speaker out)
7
● The current sound volume level is memorised even if
8
the power is turned off.
● When [Maximum VOL level] is set to [On], the volume
can only be adjusted to the maximum point you set,
and the displayed value turns red when it reached its
maximum. (see page 79)
●
When [Initial VOL level] is set to [On], the volume will
be at the set level when the display is turned on. (see
page 79)

Sound mute On / Off

It is useful when you want to mute the sound temporarily,
for example, when answering the phone or door.
Press <MUTE>.
●
appears on the screen and the sound is muted.
Press again to reactivate the sound.
● It is also reactivated when the power is turned on / off
or the volume level is changed.
● While MUTE is active,
after operation.
● In [ENGLISH(US)] OSD language,
[MUTE].
-
+
INPUT MENU
20
is displayed as a reminder
is displayed as
ENTER
35
English