Power Management Settings - Panasonic TH-55VF1HU Operating Informations

Power management settings

Set each item to reduce power consumption.
This function works only for the input terminal that is
currently selected.
[Power management settings] - submenu screen
Power management settings
Power management mode
No signal power off
HDMI power management
DIGITAL LINK power management
DVI-D1 power management
DVI-D2 power management
PC power management
Extended standby mode
To control with the remote control:
Switches [Power management mode] by pressing
<ECO>.
Power management mode
■
[Power management mode]: [On]
The following fixed values are set to the menu of
power consumption reduction. Individual setting is not
available.
[No signal power off]: [Enable]
[HDMI power management]: [On]
[DIGITAL LINK power management]: [On]
[DVI-D1 power management]: [On]
[DVI-D2 power management]: [On]
[PC power management]: [On]
■
[Power management mode]: [Custom]
The menu of the power consumption reduction is
individually set. This setting is enabled when [Power
management mode] is set to [Custom].
[No signal power off]
When this is set to [Enable], the power supply of the
unit goes off automatically when there is no operation or
sync signal for about 10 minutes.
Note
●
With the USB input, the unit determines no signal is
present when the USB memory is not connected to
the USB terminal, or the connected USB memory
does not contain any playable file.
● This function may not operate depending on the video
output devices.
66
English
Custom
Disable
Off
Off
Off
Off
Off
Off
On
[HDMI power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at HDMI input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (sync signal) are subsequently
detected at HDMI input:
Power is turned on; the power indicator lights up
green.
[DIGITAL LINK power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at DIGITAL LINK input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (sync signal) are subsequently
detected at DIGITAL LINK input:
Power is turned on; the power indicator lights up
green.
[DVI-D1 power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 or so seconds at DVI-D1 input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (sync signal) are subsequently
detected at DVI-D1 input:
Power is turned on; the power indicator lights up
green.
[DVI-D2 power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 or so seconds at DVI-D2 input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (sync signal) are subsequently at
DVI-D2 input:
Power is turned on; the power indicator lights up
green.