Panasonic TH-55VF1HU Operating Informations page 56

[Controller ID / Terminal]
Displays ON/OFF of the function to control with ID,
and displays the terminal to use when controlling with
the remote control.
[Controller out terminal]
Displays the terminal used for the remote control
communication output.
Set each item.
Multi control auto setting(DIGITAL LINK)
Status
DIGITAL LINK daisy chain
Display ID
Network control / IP address
Serial ID / Terminal
Serial out terminal
Controller ID / Terminal
Controller out terminal
Start
Display ID
Changing network control
Changing Serial/IR terminal
[Display ID]
Sets the ID you want to assign to the display you are
operating.
[Auto], 1 to 100
When setting to [Auto], the ID is set using the
number counted from the first unit connected with
the DIGITAL LINK daisy chain.
Example: 15th unit counted from the beginning
ID: 15
Note
●
When connected with the DIGITAL LINK daisy chain,
the ID number and control terminal are automatically
set for the preceding-stage display before the display
on which the operation is performed.
[Changing network control]
Sets whether to change settings in [Network control]
or maintain the current settings.
[No]:
Maintains the settings.
[Yes]:
Switches [Network control] to [On] when it is set to
[Off], and switches [DHCP] to [On].
56
English
Wait
020/025
0
Off
192.168.0.8
On SERIAL IN
SERIAL OUT
On Built-in
IR OUT
1
Yes
Yes
[Changing Serial/IR terminal]
Sets whether to change the control terminal setting
or maintain the current setting when performing
auto setup.
[No]: Maintains the settings.
[Yes]: The setting of each IN/OUT terminal
connected via DIGITAL LINK are changed
to [DIGITAL LINK].
Note
●
If there is a terminal connected with the DIGITAL
LINK daisy chain on the display with only the input
side or the output side connected, the setting will
be changed.
Select [Start] and press <ENTER>.
Starts auto setting.
The following screen is displayed when the setting
is completed.
Multi control auto setting(DIGITAL LINK)
Status Finished
DIGITAL LINK daisy chain 020/025
Display ID
Network control / IP address On
●
When [DHCP] is set to [On], IP address is updated
automatically.
The following screen is displayed on the subsequent-
stage displays.
Multi control auto setting(DIGITAL LINK)
Status Finished
DIGITAL LINK daisy chain 021/025
Display ID
Network control / IP address On
●
For each subsequent-stage display, an ID number
with 1 added to the ID number of each preceding-
stage display is assigned.
If the ID number of the preceding-stage display is
"100", ID number "1" is set.
●
When [DHCP] is set to [On], IP address is updated
automatically.
1
192.168.0.8
2
192.168.0.9