Multi Display Settings - Panasonic TH-55VF1HU Operating Informations

Multi display settings

1 to 10 displays can be aligned in horizontal direction
and vertical direction respectively, and those displays
are regarded as one group. The enlarged image is
shown on the combined display.
[Multi display settings] - submenu screen
Multi display settings
Multi display setting
Horizontal scale
Vertical scale
0
Bezel H adjustment
Bezel V adjustment 0
Location
Frame control
Reverse scan
Note
● The settings are memorised separately for each
input terminal.
● When the multi display is set to [Off], adjust to the
same angle of view for [Position] (see page 41).
Then, set the multi display to [On]. Again, make
fine adjustment of the angle of view for [Position].
●
The [Position] menu can be adjusted in the multi
display status.
●
When using the USB input, [Frame control] and
[Reverse scan] cannot be set.
●
[Frame control] and [Reverse scan] functions are
effective when all of the vertical synchronizations
input into each display are the same.
■
[Multi display setting]
[Off]:
The display is not divided when enlarged.
[On]:
The display is divided when enlarged.
When [On] is set, the display aspect is [16:9].
To control with the remote control:
Switches ON / OFF by pressing <MULTI
DISPLAY>.
■
[Horizontal scale]
Set the horizontal scale in the multi display.
1 to 10 (1 to 2 for USB input)
Off
2
2
A1
1
Off
■
[Vertical scale]
Set the vertical scale in the multi display.
1 to 10 (1 to 2 for USB input)
Example:
[Horizontal scale] [5] and [Vertical scale] [5] is set in the
multi display
■
[Bezel H adjustment], [Bezel V adjustment]
Adjust the area of image hidden in the joint horizontally
and vertically respectively.
0 to 100
Display example
Setting value: 0
Displays the entire image including the joint area.
(Suitable when displaying character information on
PC.)
Setting value: 100
Does not display the image of the joint area.
(Suitable when displaying motion pictures.)
57
English