Information Timing - Panasonic TH-55VF1HU Operating Informations

Power on message(Power
management)
Sets to show/hide an information message that tells
the power has been turned off by "Power management"
function when the power is turned on.
[On]:
The information is shown when the power is turned
on.
[Off]:
The information is not shown when the power is
turned on.
Note
●
This setting is enabled only when "Power
management" function is [On] (see page 66).
POWER button lock
Sets the lock setting for <Power button (Unit)> (
[On]:
<Power button (Unit)> operation is disabled.
[Off]:
<Power button (Unit)> operation is enabled.
Note
● This function is only for TH-55VF1HU.
LAN control protocol
Select the LAN control protocol.
[Protocol 1]:
Control with the Panasonic Display sequence.
[Protocol 2]:
Control with the sequence that is compatible with
Panasonic Projector.
Note
● For PJLink and WEB browser control, the operation is
possible regardless of the setting.
● When performing the command control with TCP/IP,
select [Protocol 1].
● When operating the "Early Warning Software" or
"Multi Monitoring & Control Software", select [Protocol
2].

Information timing

Set up the informing manner for no signal or
temperature rising.
During RS-232C controls:
Warning or error message sent from the display
automatically.
During LAN controls:
Acquire the warning or error message from the
display.
1
Select the item with
Select the set point with
Information timing
No signal warning
No signal warning timing
No signal error
No signal error timing
).
Temperature warning
[No signal warning]
When set to [On], the display sends out the no signal
warning.
[No signal warning timing]
Set up the detecting time for no signal warning.
(Range: 01 - 60, Interval: 1 minute)
[No signal error]
When set to [On], the display sends out the no signal
error.
.
.
On
5min
On
10min
On
English
81