Usb Terminal Connection; Speaker Terminal Connection - Panasonic TH-55VF1HU Operating Informations

USB terminal connection

Connect the USB memory to use [USB media player].
(see page 98)
USB memory device
Pin assignments and signal names for USB Terminal
1
Pin No.
+5 V DC
DATA -
DATA +
GND (Ground)
Power of up to 5V/500mA can be supplied to an external
device when the picture is displayed.
●
If the electric current exceeding the power supplying
capability is applied, the output is blocked, and the
following message is displayed.
[USB DC5V OUT overload. Please remove cable or
equipment, then turn the display off/on.]
In this case, remove the equipment and then turn the
power off/on using the remote control, etc.
Note
●
Depending on the type of a USB memory device,
it may come in contact with the periphery such
as a back cover, and cannot be attached. Use a
commercially sold extension cable, or use a small
type of a USB memory device connectable to this
unit.
● Depending on the USB memory, the access lamp
may remain blinking even when it is not being
accessed. In this case, remove the device after
switching to the input other than USB.
Also, when reading the user image, remove the
device after the menu screen display finishes (see
page 50). When performing the data cloning, remove
the device after the completion screen is displayed.
(see page 105)
2 3 4
Signal name

Speaker terminal connection

Please use 8 Ω/10 W speaker.
Red
Black
While pressing the
lever, insert the core
wire.
Return the lever.
English
29