Function Button Settings - Panasonic TH-55VF1HU Operating Informations

■
[Resume play]
Set to enable or disable resume play.
■
[Scenario file check]
Execute the USB memory contents check. If any error is
detected, the error code and file name will be displayed.
For details of the error codes, refer to "USB memory
contents check". (see page 103)
Select [Scenario file check] with
<ENTER>.
Scenario file check
Available
■
[Slide show duration]
Select the displaying duration for still images.
[10 sec] to [600 sec]

Function button settings

Assigns specific functions to the numeric buttons (<0>
to <9>). The buttons can be used as shortcut keys by
assigning frequently used operations.
1
Switch [Function group] with
[Function button settings] - submenu screen
Function button settings
Function group
Function button 1
Function button 2
Function button 3
Function button 4
Function button 5
Function button 6
Function button 7
Function button 8
Function button 9
Function button 0
Function button guide
2
Select the numeric button with
and set the function to assign with
.
and press
Input
Input
HDMI
↓
DisplayPort
Memory load
DIGITAL LINK
DVI-D1 ↓
DVI-D2
Shortcut
PC
COMPONENT
VIDEO
USB
---
On
■
Functions assignable to the numeric
buttons
[Input] (Direct input select)
Input can be selected with single-touch operation.
[HDMI] / [DisplayPort] / [DIGITAL LINK] /
[DVI-D1] / [DVI-D2] / [PC] / [COMPONENT]* /
[VIDEO] / [USB]
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-
in select]. (see page 51)
[Memory load]
Memory can be loaded with single-touch operation.
Memory load (see page 48)
[MEMORY1] to [MEMORY8]
● [MEMORY1] to [MEMORY8] load functions are
already assigned to <1> to <8> respectively.
These settings cannot be changed.
[Shortcut]
[Signal], [Screensaver], [Set up timer], [Power
management settings], [Network settings],
[Multi display settings]
● Pressing the numeric button displays the menu
screen. Pressing the button again exits the
menu screen.
[AV mute]
● Pressing the numeric button mutes the audio
and pictures.
To cancel, press any button on the remote
.
control except power button.
[Digital zoom]
● Switches to [Digital zoom] mode by pressing
numeric buttons. (see page 38)
[Display ID / Display name]
● Pressing the numeric button enlarges [Display
ID] and [Display name].
Shipping condition
The following functions are assigned to the numeric
buttons as factory default.
[Input]
1 HDMI
2 DisplayPort
3 DIGITAL LINK MEMORY3
4 DVI-D1
5 DVI-D2
6 PC
7
COMPONENT MEMORY7
8 VIDEO
9
USB
0
[Memory
load]
MEMORY1 [Signal]
MEMORY2 [Screensaver]
[Set up timer]
[Power
MEMORY4 management
settings]
MEMORY5 [Network settings]
MEMORY6 [AV mute]
[Multi display
setting]
MEMORY8 [Digital zoom]
Display ID /
–
Display name
– –
[Shortcut]
–
73
English