Panasonic TH-55VF1HU Operating Informations page 62

[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
[Main input]
Displays the (main) input initially used for viewing.
[Current input]
Displays whether the input currently in use for viewing
is the (main) input initially used for viewing or the
backup one.
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 51)
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
HDMI
DIGITAL LINK
DVI-D1
DVI-D2
Backup
PC
COMPONENT*
VIDEO
USB
○: S electable for both Primary and Secondary.
: Selectable for either Primary or Secondary.
×: Not selectable for neither Primary nor Secondary.
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 51)
Recall display
Pressing <RECALL> displays any of the followings.
● When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI
Backup mode OK
62
English
Main
HDMI
PC
DIGITAL
LINK
COMPONENT*
DVI-D1
VIDEO
DVI-D2
○ ○
×
○ ○
16:9
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
When the conditions for the Backup Input function
are met, the following screen is displayed.
Note
●
This menu will be greyed out and cannot be set when
[Input search] is set to the item other than [Off]. (see
page 58)
● With the USB input, the unit determines video signals
are interrupted by judging the USB memory is not
connected to the USB terminal.
●
Switching to the input connected with the daisy chain
via DIGITAL LINK requires the switching time.
●
This function may not operate correctly depending on
the image playback device.
USB
○
×
HDMI
16:9
Primary backup input
Backup mode OK