Screensaver (For Preventing Image Retention) - Panasonic TH-55VF1HU Operating Informations

Remote control operation while the menu is deleted
Selecting colour
Adjusting red,
green and blue
Displayed for 5 seconds if remote control operation is
performed.
Select colour
[Select colour]
Select the colour to correct with
Adjusting red, green and blue
Adjust with numeric buttons (<1> to <9>).
<1> ‒
Red <2> Press and hold to reset to default.
<3> +
<4> ‒
Green
<5> Press and hold to reset to default.
<6> +
<7> ‒
Blue
<8> Press and hold to reset to default.
<9> +
●
Pressing and holding <1><4><7> and <3><6><9> will
increase or decrease the value in succession.
●
Pressing <2><5><8> briefly will show the current
value.
Note
●
While the menu is deleted, this setting cannot be
operated with the buttons on the unit.
64
English
Red
2048
.
0
0
Screensaver
(For preventing image retention)
Do not display a still picture, especially in 4:3 mode, for
any length of time.
If the display must remain on, a Screensaver should be
used.
Screensaver
2016/01/01
Start
Mode
■
Screensaver settings
Screensaver operation
When the Screensaver is operating, the following 5
patterns are displayed full screen for 5 seconds each,
and it will be repeated.
Black → Dark grey → Grey → Light grey → White →
Light grey → Grey → Dark grey
To start Screensaver now
Select [On] in [Mode].
Select [Start] and press <ENTER>.
●
The menu screen will disappear and the
Screensaver will be activated.
Screensaver
2016/01/01
Start
Mode
Note
●
If the following buttons are pressed while the screen
saver is operating, the screen saver is cancelled.
Remote control: <RETURN>
Main unit: <MENU (Unit)> <INPUT> <+ (Unit)>
<- (Unit)>
●
When the display is turned off, the Screensaver will
be deactivated.
To set interval of Screensaver
Select [Interval] in [Mode].
Set [Periodic time].
●
Press to change the time by 15 minutes.
● In [ENGLISH(US)] OSD language, [Periodic time]
is displayed as [SHOW DURATION].
Set [Operating time].
●
Press once to change the time by 1 minute.
Keep pressing down to change the time by 15
minutes.
●
In [ENGLISH(US)] OSD language, [Operating
time] is displayed as [SAVER DURATION].
FRIDAY 10:00
Off
FRIDAY 10:00
On
<ENTER (Unit)>