Data Cloning; Copying Data To Other Display Via Lan - Panasonic TH-55VF1HU Operating Informations

Data Cloning

Menu settings and adjusted values set on a single
display can be copied to multiple displays via LAN or
using a USB memory.
■
Data that can be copied
Settings and set values of [Picture], [Sound], [Setup],
[Position] and [Options] menus
User image registered in [Setup] - [Startup image
settings]
●
The following data cannot be copied. Setting is
required for each display.
[Date and time]
Setting for [Network settings] - [LAN setup]
Display ID in [Control settings]
Setting for [Signal] - [Multi dynamic backlight
settings]
Setting for [Options] - [Long life settings]
■
Supported device
● Commercially available USB memory devices
are supported. (Those with security functions are
not supported.)
● USB memory devices other than those formatted
in FAT16 or FAT32 cannot be used.
● Up to 32 GB of USB memory in size are
supported.
● Only single partition configuration is supported.
Note
● Set the input to something other than [USB], and
perform the data cloning.
● [USB data cloning] can also be displayed using the
main unit buttons.
Operate in the same way as described in "Options
Adjustments" - "Unit" (see page 77).
●
The remote control is necessary to operate [LAN
data cloning].
Copying data to other display via
LAN
1
Display [Setup] menu pressing
<SETUP>.
2
Select [OSD language] with
press <ENTER> for over 3 seconds.
The following display appears.
Options
Display software information
Software licenses
USB data cloning
LAN data cloning
Shipping
3
Select [LAN data cloning] with
and press <ENTER>.
4
Select [Select display] with
press <ENTER>.
Displays on the same subnet are listed.
LAN data cloning
Execute
Select displays
Write protect
Status Display name
5
Select the display to copy the data
to with and press <VOL +>.
Select all the displays to copy the data to.
Select display
Please check the display to register.
Check Display name
VF1H-001
VF1H-002
VF1H-004
VF1H-005
VF1H-014
VF1H-006
VF1H-041
VF1H-009
6
Press <ENTER>.
and
and
Off
IP address
IP address
192.168. 0. 1
192.168. 0. 2
192.168. 0. 4
192.168. 0. 25
192.168. 0. 31
192.168. 0. 7
192.168. 0.124
192.168. 0.211
English
105