Error response
Error message
"ERR1"
: Undefined control
command
"ERR2"
: Out of parameter
range
"ERR3"
: Busy status or
reception invalid
period
"ERR4"
: Timeout or reception
invalid period
"ERR5"
: Wrong data length
4 bytes
Note
●
With some of the commands, a part of character
string of the transmitted data may not be included in
the received data.
●
Consult your local Panasonic dealer for detail
instructions on command usage.
For more details, visit the following web site.
http://panasonic.net/prodisplays/
PJLink protocol
Last
The unit's Network function is compatible with PJLink
terminal
Class 1. The following operations can be performed from
symbol
a computer when PJLink protocol is used.
●
Setting the Display
●
Querying the Display status
Supported commands
The commands to control the unit with PJLink protocol
(CR)
are as follows.
0x0d
Command
POWR
POWR?
1 byte
INPT
INPT?
Control
Power control
0: Standby
1: Power On
Power status query
0: Standby
1: Power On
Input switch
11: PC IN input (PC)
21: COMPONENT/RGB IN input
(COMPONENT)
22: VIDEO input (VIDEO)
31: HDMI input (HDMI)
32: DisplayPort input (DisplayPort)
33: DIGITAL LINK input
(DIGITAL LINK)
34: DVI-D IN 1 input (DVI-D1)
35: DVI-D IN 2 input (DVI-D2)
41: USB input (USB)
Input switch query
11: PC IN input (PC)
21: COMPONENT/RGB IN input
(COMPONENT)
22: VIDEO input (VIDEO)
31: HDMI input (HDMI)
32: DisplayPort input (DisplayPort)
33: DIGITAL LINK input
(DIGITAL LINK)
34: DVI-D IN 1 input (DVI-D1)
35: DVI-D IN 2 input (DVI-D2)
41: USB input (USB)
89
English