Panasonic TH-55VF1HU Operating Informations page 61

Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
HDMI
DIGITAL LINK
DVI-D1
DVI-D2
Backup
PC
COMPONENT*
VIDEO
USB
○: S electable for both Primary and Secondary.
×: Not selectable for neither Primary nor Secondary.
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 51)
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI
16:9
Main input
Backup OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI
16:9
Backup Input
DVI
When the conditions for the Backup Input function
are met, the following screen is displayed.
Main input
Backup OK
Main
HDMI
PC
DIGITAL
LINK
COMPONENT*
DVI-D1
VIDEO
DVI-D2
○ ×
× ×
× ×
■
[Input change mode]: [Normal]
Switches to the backup input if an interruption of
video occurs.
Note
●
Upon switching to the backup input, the video and
audio adjustment values for the backup input will be
used.
USB
●
When an analogue (PC, COMPONENT or VIDEO)
input is being used for viewing, you cannot set an
analogue (PC, COMPONENT or VIDEO) input as a
backup input.
●
Any analogue (PC, COMPONENT or VIDEO)
input cannot be set as [Primary backup input] or
×
[Secondary backup input].
●
This function will start operating once a video signal is
detected by both the input in use for viewing and the
backup input and the [Backup input change] item is
×
displayed as [Active].
[Primary backup input]
×
Sets the first priority backup input.
(None) / [HDMI] / [DIGITAL LINK] / [DVI-D1] /
[DVI-D2] / [PC] / [COMPONENT]* / [VIDEO] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
When an analogue (PC, COMPONENT or VIDEO)
input is being used for viewing, you cannot set an
analogue (PC, COMPONENT or VIDEO) input as a
backup input.
Any analogue (PC, COMPONENT or VIDEO)
input cannot be set as [Primary backup input] or
[Secondary backup input].
[Secondary backup input]
Sets the second priority backup input.
(None) / [HDMI] / [DIGITAL LINK] / [DVI-D1] /
[DVI-D2] / [PC] / [COMPONENT]* / [VIDEO] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
When an analogue (PC, COMPONENT or VIDEO)
input is being used for viewing, you cannot set an
analogue (PC, COMPONENT or VIDEO) input as a
backup input.
Any analogue (PC, COMPONENT or VIDEO)
input cannot be set as [Primary backup input] or
[Secondary backup input].
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function.
[Disable]:
Unreturned
[Enable]:
Returned
61
English