Panasonic TH-55VF1HU Operating Informations page 103

Play contents
For the above setting example, the following contents
will be played on repeat (loop).
Parent side
1. L_Introduction.jpg
2. L_Contents_Video1.wmv
3. L_Contents_Video2.wmv
4. L_Contents_Video3.wmv
Child side
1. R_Introduction.jpg
2. R_Contents_Video1.wmv
3. R_Contents_Video2.wmv
4. R_Contents_Video3.wmv
1: Played for the duration of the play time of
*
L_Contents_Video3.wmv (Parent side).
Note
●
While the menu screen is not displayed, you can
skip to the next playback file with
playback file with , or play back again from the
beginning of the file with
only).
When this operation is performed, a black screen is
inserted before playback.
●
[Multi display settings] supports 2×1, 1×2 and 2×2.
(see page 57)
(10 seconds)
(10 seconds)
(20 seconds)
(*1)
(10 seconds)
(10 seconds)
(20 seconds)
(*1)
, to the previous
(Remote control operation
■
USB memory contents check
You can run a USB memory contents check in [USB
media player settings] - [Scenario file check].
(see page 72)
If an error is present, the information is given with the
following details.
A(B): C
D
A: Name of the file with an error
B: Row with an error
C: Error code
D: Detail of the error
Note
●
Shows leading error codes.
Details of the detected errors are as follows.
Error
code
1. No USB memory is inserted.
2. scenario.dat/filelist.dat cannot be opened.
There is an error in the contents of
3.
scenario.dat/filelist.dat.
4. The play file format is not supported.
5. No play file exists.
The necessary group ID for Multi Media
6.
Player has not been specified.
7. There are several identical file definitions.
8. The scenario's play time is over the limit.
The file definition listed in the scenario is
9.
not in the file list.
The scenario contains 0 or over 1000 play
10.
files.
There are 0 or over 1000 play files.
11.
(Single Media Player (Type 1) only)
Only the group ID is listed on the file list.
12.
(Multi Media Player only)
For error code 1 and 11, only the error code and
•
the detail of the error are displayed as shown
below.
1
No USB memory is inserted.
Supplementary note
The USB memory contents check does not determine
whether or not a play file is playable.
If a file cannot be played while Media Player is active,
an error message will be displayed.
When performing the synchronized playback on the
Multi Media Player, check in the menu [USB media
player settings] - [Scenario file check] that the file is
playable.
Detail of the error
English
103