Date And Time; Network Settings - Panasonic TH-55VF1HU Operating Informations

Date and time

Set date and time. ([- -] shows no programme is set.)
[Date and time] - submenu screen
Date and time
2016/01/01
Set
Year
Month
Day
Hour
Minute
■
Set date and time
Select [Year / Month / Day / Hour / Minute].
Set the selected item.
Date and time
2016/01/01
Set
Year
Month
Day
Hour
Minute
Select [Set] and press <ENTER>.
Date and time
2017/02/05
2015/01/01
Set
Year
Month
Day
Hour
Minute
Note
● If the present date and time are not set, the time
settings for [Set up timer], [Screensaver], etc. cannot
be made.
● The present date and time setting is reset in the
following case.
When the main unit is left unattended for 7 days or
longer after the main unit is turned off with the <Main
power switch>, the power plug is removed, or power
failure has occurred, etc.
●
Date and time cannot be set when [Year / Month /
Day / Hour / Minute] are set to [- -].
FRIDAY 10:00
2016
1
1
10
0
FRIDAY 10:00
2017
1
1
10
0
SUNDAY 18:00
99:99
2017
2
5
18
0

Network settings

Set when networking with a computer.
[Network settings] submenu will be displayed.
Network settings
Network control
Auto display name
Display name
LAN setup
Network status
DIGITAL LINK mode
DIGITAL LINK status
DIGITAL LINK menu
AMX D. D.
Crestron Connected™
Extron XTP
USB memory network settings
Reset
■
[Network control]
Set when controlling with the unit's LAN terminal.
[On]:
Controls via LAN using the LAN terminal of the
Display. The power indicator lights orange when
the power is turned off with the remote control
(standby).
[Off]:
Invalidates control with LAN terminal.
(In this case, the power consumption of Standby
condition (when the power is turned off with the
remote control) will be slightly reduced.)
Note
●
When using the LAN control function for "Using
Network Function" (see page 83 - 97), set this
function to [On].
■
[Auto display name]
Sets whether to change the display name
automatically.
[On]:
Changes the display name automatically in
accordance with the set point of the display ID.
[Off]:
The display name is not changed automatically.
■
[Display name]
The name of the Display that is shown on the network
can be changed.
Note
●
The name can be changed only when [Auto display
name] is set to [Off].
●
Display ID is not reset to default with [Network
settings] - [Reset].
Off
On
VF1H-000
Auto
Off
Off
Off
Permit
English
69