Panasonic TH-55VF1HU Operating Informations page 26

It is possible to daisy chain multiple displays, and
then control the specific display with PC.
First display
Second display
Third display
Note
●
When daisy chaining, set [Serial daisy chain position].
(see page 55)
●
When daisy chaining, use a straight cable which pin
No. to are hard wired.
26
English
Pin assignments and signal names for SERIAL
Terminal
1 2
6
Pin No.
NC (not connected)
RXD
TXD
Non use
GND (Ground)
Non use
RTS
CTS
NC (not connected)
These signal names are those of computer
specifications.
Communication parameters
Signal level: RS-232C compliant
Synchronization method: Asynchronous
Baud rate: 9600 bps
Parity: None
Character length: 8 bits
Stop bit: 1 bit
Flow control: None
3 4 5
7 8 9
Signal Name
Shorted in this set