Selecting The Input Signal - Panasonic TH-55VF1HU Operating Informations

Selecting the input signal

Select the signals input to the unit.
Press <INPUT> or <INPUT (Unit)>.
Unit
INPUT
Switches input every time the buttons are pressed.
[HDMI] → [DisplayPort] → [DIGITAL LINK] → [DVI-D1]
→ [DVI-D2] → [PC] → [COMPONENT]* → [VIDEO] →
[USB]
[HDMI]:
HDMI terminal, HDMI input
[DisplayPort]:
DisplayPort terminal, DisplayPort input
[DIGITAL LINK]:
DIGITAL LINK terminal, DIGITAL LINK input
[DVI-D1]:
DVI-D IN 1 terminal, DVI-D input
[DVI-D2]:
DVI-D IN 2 terminal, DVI-D input
[PC]:
PC IN terminal, PC input
[COMPONENT]*:
COMPONENT/RGB IN terminal, Component input
[VIDEO]:
VIDEO terminal, composite video input
[USB]:
USB terminal, USB input
34
English
-
+
MENU ENTER
PC
16:9
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 51)
Note
● Displays the signal name as set in [Input label]. (see
page 65)
● Input will not be switched unless [Input lock] is set to
[Off]. (see page 79)
● Image retention (image lag) may occur on the liquid
crystal panel when a still picture is kept on the panel
for an extended period. To prevent such a problem,
using the screensaver and wobbling is recommended.
(see page 64, 67)