Table of Contents
Advertisement
2
1
IR IN
IR OUT
External IR
Receiver
外部IR受信機
External IR receiver (supplied)
First display
Second display
Third display
IR Daisy Chain Cable (supplied)
USB terminal connection
Connect a USB device to use [USB media player].
USB
USB memory device
Pin assignments and signal names for USB Terminal
1
2
Pin No.
1
+5 V DC
2
DATA -
3
DATA +
4
GND (Ground)
Notes
●
Some types of USB device may be too big to fit into
the socket. Use a commercially available extension
cable, or use a smaller type of USB memory device
that will fit this Display.
●
Some types of USB memory may cause the access
light to continue blinking even when they are not
being accessed. In this case, switch to another input
and remove the USB.
Connecting Multiple Displays in a
Daisy-chain configuration
You can connect multiple Displays to create a daisy-
chain configuration for applications such as a video wall.
3
4
IR IN
IR OUT
IR IN
IR OUT
5
1
3
4
Signal name
Display control connection
Connect the [SERIAL OUT] connector of DISPLAY 1 to
the [SERIAL IN] connector of DISPLAY 2.
DISPLAY 1
PC
[RS-232C]
[SERIAL IN]
[SERIAL OUT]
Connect the [IR OUT] connector of DISPLAY1 to the [IR
IN] connector of DISPLAY2
External IR
receiver
DISPLAY 1
[IR IN]
[IR OUT]
Digital video connection
Connect the [DVI OUT (VGA OUT)] connector of
DISPLAY 1 to the [DVI IN] connector of DISPLAY 2.
DISPLAY 1
PC
[DVI]
[DVI IN]
[DVI/VGA OUT]
Connect the [DP OUT] connector of DISPLAY 1 to the
[DP IN] connector of DISPLAY 2.
DISPLAY 1
PC
[DP]
[DP IN]
Connect the [DVI OUT ] connector of DISPLAY 1 to the
[DVI IN] connector of DISPLAY 2.
DVD / VCR / VCD
DISPLAY 1
[HDMI]
[DVI IN]
Analogue video connection
Connect the [DVI OUT (VGA OUT)] connector of
DISPLAY 1 to the [VGA IN] connector of DISPLAY 2.
DISPLAY 1
PC
[VGA]
[VGA IN]
[DVI/VGA OUT]
DISPLAY 2
[SERIAL IN]
DISPLAY 2
[IR IN]
DISPLAY 2
[DVI IN]
DISPLAY 2
[DP OUT]
[DP IN]
DISPLAY 2
[DVI OUT]
[DVI IN]
DISPLAY 2
[VGA IN]
English
25
Advertisement
Table of Contents
