Rigol MSO1000Z series User Manual page 45

Chapter 1 Quick Start
level value will change with the up and down of
Note:
In slope trigger, runt trigger and window trigger, two trigger level labels
( and ) are displayed.
12. CH1 Vertical Scale
Display the voltage value per grid of CH1 waveform vertically.

Press CH1 to select CH1, and use VERTICAL

parameter.
The following labels will be displayed according to the current channel

setting: channel coupling (e.g.
13. Analog Channel Label/Waveform
Different channels are marked with different colors and the colors of the channel
label and waveform are the same.
14. CH2 Vertical Scale
Display the voltage value per grid of CH2 waveform vertically.

Press CH2 to select CH2, and use VERTICAL

parameter.
The following labels will be displayed according to the current channel

setting: channel coupling (e.g.
15. CH3 Vertical Scale
Display the voltage value per grid of CH3 waveform vertically.

Press CH3 to select CH3, and use VERTICAL

parameter.
The following labels will be displayed according to the current channel

setting: channel coupling (e.g.
16. CH4 Vertical Scale
Display the voltage value per grid of CH4 waveform vertically.

Press CH4 to select CH4, and use VERTICAL

parameter.
The following labels will be displayed according to the current channel

setting: channel coupling (e.g.
17. Message Box
Display the prompt messages.
18. Digital Channel Status Area
Display the current status of the 16 digital channels. The digital channels
currently turned on are displayed in green and the digital channel currently
selected is displayed in red. The digital channels turned off are displayed in grey.
Note: This function is only applicable to MSO1000Z-S and MSO1000Z models
oscilloscopes.
MSO1000Z/DS1000Z User's Guide
SCALE to modify this
) and bandwidth limit (e.g.
SCALE to modify this
) and bandwidth limit (e.g.
SCALE to modify this
) and bandwidth limit (e.g.
SCALE to modify this
) and bandwidth limit (e.g.
RIGOL
.
).
).
).
).
1-21