Rigol MSO1000Z series User Manual page 149

Chapter 6 MATH and Measurement
1. Select Values
Press Values and use
measurement items opened are displayed at the upper left corner of the screen.
2. Adjust Cursor Position
Adjust cursor AX: press AX and use

Adjust cursor BX: press BX and use

Adjust cursor AY: press AY and use

Adjust cursor BY: press BY and use

Adjust cursors AX and BX at the same time: press ABX and use

adjust the position of cursors AX and BX at the same time.
Adjust cursors AY and BY at the same time: press ABY and use

adjust the position of cursors AY and BY at the same time. During the
adjustment, the measurement results will change accordingly. The
adjustable range is limited within the screen.
Note: You can also press down
cursor.
MSO1000Z/DS1000Z User's Guide
Center
Point
BX
Figure 6-9 XY Cursor Measurement Definition
to turn the value(s) to be measured on or off. The
Open the BX-AX and BY-AY measurement items.

Open the dX*dY measurement item.

Open the dX/dY measurement item.

Open the dY/dX measurement item.

Open the absAA and argAA measurement items at the same

time.
Open the absAB and argAB measurement items at the same

time.
Open the absBA and argBA measurement items at the same

time.
Open the absBB and argBB measurement items at the same

time.
absAA
argAA
AX
Y-axis
to adjust the position of cursor AX.
to adjust the position of cursor BX.
to adjust the position of cursor AY.
to adjust the position of cursor BY.
knob continuously to switch the current
RIGOL
AY
X-axis
BY
to
to
6-3