Using The Rtk Module - dji MAVIC 2 ENTERPRISE Advanced User Manual

MAVIC 2 ENTERPRISE Advanced
Make sure that the accessories are correctly and securely mounted on the aircraft before use.
Otherwise, they may fall from the aircraft during flight.
DO NOT point the spotlight or the beacon directly at people's eyes.
DO NOT use the speaker near people or in an urban area where noise-sensitive structures are
concentrated as the loudness could lead to accidents or injuries.

Using the RTK Module

Enable/Disable RTK
Make sure that RTK positioning is enabled and the RTK service type is correctly set to either Network
RTK or Custom Network RTK before each use. Go to Camera View >
type. Otherwise, the aircraft will be unable to take off when there is no differential data.
Using with Custom Network RTK
Connect a dongle to the remote controller or use the app to connect to Wi-Fi and to use the Custom
Network RTK. Custom Network RTK can be used in place of a RTK base station. Connect the
Custom Network RTK account to the designated NTRIP server to send and receive differential data.
Keep the remote controller powered on and connected to the internet while using this function.
1. Make sure the remote controller and the aircraft are linked and the app is connected to the
internet.
2. Go to Camera View >
the NTRIP host, port, account, password, and mount point information.
3. Wait to connect to the NTRIP server. In RTK Settings, the positioning of the aircraft is displayed
as FIX to indicate that the aircraft has obtained and used the differential data from the Custom
Network RTK.
32
©
2021 DJI All Rights Reserved.
User Manual
> RTK to set the RTK service type as Custom Network RTK and fill in
> RTK to set the service