Lightbridge 2 Air System; Gps-Compass Pro - dji MATRICE 600 Disclaimer And Safety Manuallines

Hide thumbs Also See for MATRICE 600:

Table of Contents

4. Connect cables in strict accordance with port descriptions.

5. The recommended storage temperature is -20° to 50°C (-4° to 122° F).

Power Management Unit (PMU)

1. The PMU has an input voltage range of 10.5-51 V (3-12S battery equivalent), output voltage of 9 V

and maximum output current of 2 A. Be sure to use the PMU in strict accordance with these

specifications.

2. Only use the power cable extending from the center frame to supply power to the PMU.

3. The recommended storage temperature is -20° to 50°C (-4° to 122° F).

Flight Controller

1. The flight controller is neither waterproof nor oil-proof.

2. Check regularly to ensure the flight controller is firmly secured.

3. DO NOT place devices producing heat near the flight controller.

PMU

1. DO NOT block or cover the PMU to maximize heat dissipation and system performance.

Lightbridge 2 Air System

To avoid component malfunction, serious injury, and property damage, observe the following rules:

1. Install the antennas before powering on the Air System.

2. ONLY use the DBUS cable that comes with the Matrice 600, or else the Lightbridge 2 Air System will

not function normally.

To avoid component malfunction, serious injury, and property damage, make sure:

1. GPS-Compass Pro's collapsible mount is unfolded and the extension rod is securely mounted

before each flight.

2. GPS-Compass Pro is securely mounted and the arrow is pointing towards the nose of the aircraft.

3. Settings in the DJI Assistant 2 are correct.

To avoid possible serious injury and property damage, observe the following rule:

1. Land immediately when severe drifting occurs in flight, i.e., the aircraft does NOT fly in straight lines.

Table of Contents

M600