Interior Light Switch - Mitsubishi Endeavor Owner's Manual

Features and controls

Interior light switch

The interior light switch can be used for adjusting the follow-
ing switches: dome light, reading lights, luggage room light,
rear personal lights and door lights.
NOTE
If the light is left on with the ignition switch in the
"LOCK" position, the lights go off automatically after
about 30 minutes.
Refer to "Interior light auto-cutout function (dome light
and other lights)" on page 3-203.
3
3-198
N00537900132
1 (ON) - It is possible to turn on all of the interior lights
{dome light, reading lights, rear personal lights,
luggage room light and door lights} by placing the
interior light switch in the "ON" position.
NOTE
2 (DOOR) - It is possible to turn on all of the interior lights
{dome light, reading lights, rear personal lights,
luggage room light and door lights} by placing the
interior light switch in the "DOOR" position and
opening any door or the liftgate.
When the switch of the rear personal lights
and luggage room light are in the "OFF" posi-
tion, these lights do not come on when the
interior light switch is placed to the "ON"
position.