Mitsubishi Endeavor Owner's Manual page 255

Features and controls
PHONE button
Press this button when an incoming call is received to
answer the telephone.
When another call is received during a call, press this but-
ton to put the first caller on hold and talk to the new caller.
• In such circumstances, you can press the button briefly
to switch between callers. You will switch to the first
caller and the other caller will be put on hold.
• To establish a three-way call in such situations, press the
SPEECH button to enter voice recognition mode and
then say "Join Calls."
Press and hold this button when an incoming call is
received to refuse the call.
3
Press and hold this button during a call to end the current
call.
When another call is on hold or there is an incoming call,
you will switch to that call.
SPEECH button
Press this button to change to voice recognition mode.
If you press the button briefly while in voice recognition
mode it, will interrupt prompting and allow voice com-
mand input.
Pressing the button longer will exit the voice recognition
mode.
Pressing this button briefly during a call will enable voice
recognition and allow voice command input.
3-166
NOTE
When you press the SPEECH button to enter voice recog-
nition mode with a cellular phone paired to the system,
current information on the cellular phone, such as
"remaining battery life," "signal strength" or "roaming,"
will be displayed on the audio display.* (Refer to "Pairing
a cellular phone" on page 3-172.)
*: Some cellular phones will not send this information to
®
the Bluetooth HFP.
Call waiting and three-way calls can be used by the Blue-
®
tooth HFP, only when those services can be used with
your cellular phone.
Users may experience a delay in vehicle audio when plac-
ing a call from the handset. Users may experience a delay
in vehicle audio when answering an incoming call on the
handset. To reduce delays users should place calls and
receive calls through the Hands-free System.