Mitsubishi Endeavor Owner's Manual page 339

Comfort controls
When the air conditioning turns on, the air selection will be
controlled automatically. When the air conditioning turns off,
the air selection automatically goes back to the outside posi-
tion. The air selection indicator shows the selected position.
If high cooling performance is desired, or if the outside air is
dusty or contaminated in some way, use the recirculation posi-
tion. Switch to the outside position every now and then to keep
the windows from fogging up.
CAUTION
!
Using recirculated air for a long time may cause the
windows to fog up.
NOTE
When the " " or "
turn the air conditioning off or select the recirculation
position.
5
This prevents the windows from fogging up.
When the mode selection dial or the blower speed selec-
tion dial is set to the "AUTO" position again after manual
operation, the air selection switch will also be automati-
cally controlled.
When the coolant temperature rises above a certain point
the air selection is automatically switched to the recircula-
tion position and the indicator light (A) turns on. When
this occurs the system will not switch to the outside posi-
tion even if the selection switch is pushed.
5-20
" position is selected, you cannot
Air conditioning switch
Push the switch, and the air conditioning compressor will turn
on. The air conditioning indicator light (A) will come on.
(Green)
N00737300226