Mitsubishi Endeavor Owner's Manual page 262

Use the following procedure to pair a Bluetooth
cellular phone to the Bluetooth
1. Stop your vehicle in a safe area, put the selector lever in
the "P" (PARK) position and pull the parking brake lever.
NOTE
Make sure you park the vehicle in a safe area before pair-
ing a cellular phone to the system.
2. Press the SPEECH button.
3. Say "Setup."
4. Say "Pairing Options."
5. The voice guide will say "Do you want to Pair a phone,
delete a phone or list paired phones?" Say "Pair a phone."
NOTE
A maximum of 7 Bluetooth
can be registered.
If 7 cellular phones are already registered, delete a phone
and then pair the new phone. (Refer to "Deleting a phone"
on page 3-176.)
6. The voice guide will say "This operation should only be
performed while the vehicle is parked. Please say con-
tinue to perform this operation." Say "Continue."
®
compatible
®
HFP.
®
compatible cellular phones
7. After the voice guide says "Please say a 4-digit pairing
code," say a 4-digit code. The 4-digit code will be regis-
tered as a pairing code for the phone.
When the confirmation function is on, the system will
confirm whether the code said is acceptable. To continue
with the code, answer "Yes."
Say "No" to return to pairing code selection.
NOTE
The pairing code entered here is only used for the Blue-
®
tooth connection certification. It is any 4-digit code the
user would like to select.
Remember the pairing code as it needs to be keyed into
the phone later in the pairing process.
Depending on the Bluetooth
selected, entry of this code may be required each time the
phone attempts to "connect" to the Bluetooth
to your cellular phone owner's manual for connection
defaults and settings.
8. The voice guide will say "Start pairing procedure on
phone. See phone's manual for instructions." Refer to the
owner's manual for your cellular phone and enter into the
phone the pairing code that was registered in Step 7.
Features and controls
3
®
connection settings
®
HFP. Refer
3-173