Mitsubishi Endeavor Owner's Manual page 342

NOTE
Set the temperature {at about 75 (Type 1) or 25 (Type 2)
under normal conditions}.
When the temperature is set to the highest or the lowest
setting under the AUTO operation, the air selection and
the air conditioning will be automatically changed as fol-
lows.
• Quick Heating (When the temperature is set to the high-
est setting)
Outside air will be introduced and the air conditioning
will stop.
• Quick Cooling (When the temperature is set to the low-
est setting)
Inside air will be recirculated and the air conditioning
will operate.
When the temperature is set to the highest setting, you can
turn the air conditioning on.
Operating the air conditioning system (manual
mode)
Blower speed and vent mode may be controlled manually by
setting the blower speed selection dial and the mode selection
dial to the desired positions. To return to automatic operation,
set the dials to the "AUTO" position.
Defrosting or defogging the windshield and door win-
dows
CAUTION
!
For safety, make sure you have a clear view through
all the windows.
To remove frost or fog from the windshield and door windows,
use the mode selection dial ("
Comfort controls
N00731800027
N00732400310
" or " ").
5-23
5