Mitsubishi Endeavor Owner's Manual page 203

Features and controls
Turn off display
It is possible to set the monitor to give no display.
When the display turns on again, press the "DISP" button. The
display will return to its previous display.
1. Display "2. Turn off display" on the monitor in accor-
dance with "Basic operation" (see page 3-109), align the
cursor with it, and press the "SELECT" function button.
3
3-114
2. To set the monitor to give no display, press the "YES"
function button.
N00533900059
If you press the "NO" function button, the monitor will
return to the display in step 1 of this procedure.
NOTE
Even with no display, the display comes on momentarily
at the following times:
• When conditions for display of the road surface freeze
warning symbol are satisfied
• When an air conditioning system adjustment is made
• When an audio system adjustment is made