Mitsubishi Endeavor Owner's Manual page 228

2. The monitor will show "The setting is progressing" while
the setting change is in progress.
When the setting change has been completed successfully,
a tone will sound once and the monitor will return to the
"Interior light auto-shutoff time" display.
If the setting change is not successful, the monitor will
show "The setting failed." then return to the "Interior light
auto-shutoff time" display.
Wipers customization
1. Display "Wipers" on the monitor in accordance with
"Basic operation" (see page 3-109), align the cursor with
it, and press the "SELECT" function button.
2. Press the "
function you wish to change, and press the "SELECT"
function button.
N00534600040
• "Windshield wiper speed-sensitive operation"
→ P.3-140
• "Rear wiper intermittent interval" → P.3-140
Features and controls
" function button, align the cursor with the
3
3-139