Mitsubishi Endeavor Owner's Manual page 213

Features and controls
2. Press the " " function button, align the cursor with the
desired setting, and press the "SELECT" function button.
3
• When running: The warning is shown only while the
vehicle is moving.
• When running and stopped: The warning is shown while
the vehicle is moving and while the vehicle is stationary.
NOTE
The initial (default) setting is "When running and
stopped".
3-124
3. The monitor will show "The setting is progressing" while
the setting change is in progress.
When the setting change has been completed successfully,
a tone will sound once and monitor will return to the dis-
play in step 1 of this procedure.
If the setting change is not successful, the monitor will
show "The setting failed" then return to the display in step
1 of this procedure.
Other settings
1. Display "Other settings" on the monitor in accordance
with "Basic operation" (see page 3-109), align the cursor
with it, and press the "SELECT" function button.
N00502200027