Mitsubishi Endeavor Owner's Manual page 377

Comfort controls
To reset the lock cancellation code
In case you forget the code, it is possible to reset the code to the
"1111" that was set at the factory.
1. With the audio power OFF, push the PWR switch (1) and
AUDIO switch (6) simultaneously. The display will show
"CODE INITIAL".
2. Push the AUDIO switch (6). The display will show "INI-
TIALL OK?". If you wish to reset the code, push the
AUDIO switch (6) again. If you do not wish to reset the
code, turn the AUDIO switch (6) so the display shows
"CANCEL" and then push the AUDIO switch (6) again.
5
5-58
Text messages
N00701900032
In a vehicle with a multi center display, it is possible, by push-
ing the "DETAIL" function button (9), to change the indication
given during satellite radio reception.
If you press the "DETAIL" function button (9), the category
name, artist name, track name, and arranger name will be
shown. To return to the previous indication, push the "BACK"
function button (10).
N00702000030