Engine Coolant - Mitsubishi Endeavor Owner's Manual

To replace the oil filter
The oil filter should be replaced at the time or mileage speci-
fied in the "WARRANTY AND MAINTENANCE MAN-
UAL".
Only use high quality replacement filters on this vehicle. The
manufacturer's specifications for Genuine Mitsubishi oil filters
require that the filter can withstand a pressure of 256 psi
(1.8 MPa). A Genuine Mitsubishi oil filter is the best replace-
ment filter.
Follow the installation instructions printed on the filter.
CAUTION
!
Take care not to bend the oil filter cover when
replacing the oil filter.

Engine coolant

To check the coolant level
The coolant reserve system provides a quick visual method for
determining the coolant level. When the engine is cold, the
level of the coolant in the reserve tank should be between the
"F" (FULL) and "L" (LOW) marks. The radiator normally
remains completely full so there is no need to remove the radi-
ator cap except for checking the coolant freeze point or replac-
ing the antifreeze coolant.
Vehicle care and maintenance
N00937800395
7-9
7