Mitsubishi Endeavor Owner's Manual page 260

1. Press the SPEECH button.
2. Say "Setup."
3. Say "Confirmation prompts."
4. The voice guide will say "Confirmation prompts are
<on/off>. Would you like to turn confirmation prompts
<off/on>."
Answer "Yes" to change the setting or answer "No" to
keep the current setting.
5. The voice guide will say "Confirmation prompts are
<off/on>, ready" and then the system will return to the
main menu.
Security function
It is possible to use a passcode as a security function by setting
a passcode of your choice for the Bluetooth
When the security function is turned on, it is necessary to make
a voice input of a 4-digit passcode in order to use all functions
®
of the Bluetooth HFP, except for reception.
Setting the passcode
Use the following procedure to turn on the security function by
setting a passcode.
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Passcode."
4. The voice guide will say "Passcode is disabled. Would
5. The voice guide will say "Please say a 4-digit passcode.
N00538900012
®
HFP.
6. For confirmation purposes, the voice guide will say "Pass-
7. When the registration of the passcode is completed, the
Entering the passcode
If a passcode has been set and the security function is enabled,
the voice guide will say "Hands-free System is locked. State
the passcode to continue" when the SPEECH button is pressed
to enter voice recognition mode. Say the 4-digit passcode num-
ber to enter the passcode.
you like to enable it?" Answer "Yes."
Answer "No" to cancel the setting of the passcode and
return to the main menu.
Remember this passcode. It will be required to use this
system." Say 4 numbers of your choice from 0 to 9 in
order to input the 4-digit passcode.
code <4-digit passcode>. Is this correct?" Answer "Yes."
Answer "No" to return to the passcode input in Step 5.
voice guide will say "Passcode is enabled returning to
main menu, ready" and the system will return to the main
menu.
Features and controls
N00539000010
3
N00539100024
3-171