Mitsubishi Endeavor Owner's Manual page 227

Features and controls
NOTE
The initial (default) setting is "C".
2. The monitor will show "The setting is progressing" while
the setting change is in progress.
When the setting change has been completed successfully,
the tone will sound once and the monitor will return to the
"Dome light shutoff time" display.
If the setting change is not successful, the monitor will
show "The setting failed." then return to the "Dome light
shutoff" display.
3
3-138
Interior light auto-shutoff time
It is possible to change the period that elapses until each inte-
rior light whose switch is in the "ON" position automatically
goes off when the ignition key is turned from the "ON" posi-
tion to the "LOCK" or "ACC" position.
1. Press the " " function button, align the cursor with the
desired setting, and press the "SELECT" function button.
• A: 3 minutes
• B: 30 minutes
• C: 60 minutes
• D: No auto-shutoff
(Interior light auto-shutoff does not take place.)
NOTE
The initial (default) setting is "B".
N00535700064