Mitsubishi Endeavor Owner's Manual page 332

For ordinary defrosting
Use this setting to keep the windshield and door windows clear,
and to keep the leg area heated (when driving in rain or snow).
1. Set the mode selection dial to the "
2. Select your desired blower speed by turning the blower
speed selection dial.
3. Select your desired temperature by turning the tempera-
ture control dial.
For quick defrosting
1. Set the mode selection dial to the "
2. Set the blower to the maximum speed.
" position.
3. Set the temperature to the highest position.
NOTE
When the mode selection dial is set to the "
position, the air conditioning compressor runs automati-
cally. The outside air position will also be selected auto-
matically. (In this case, the air conditioning indicator light
will not change.)
When the " " or " " position is selected, you cannot
turn the air conditioning off or use the recirculation posi-
tion. This prevents the windows from fogging up.
When defrosting, do not set the temperature control dial
near the "MAX A/C" position. This would blow cool air
on the window glass and fog it up.
Comfort controls
" position.
5
" or " "
5-13