Mitsubishi Endeavor Owner's Manual page 238

2. The monitor will show "The setting is progressing" while
the setting change is in progress.
When the setting change has been completed successfully,
a tone will sound once and the monitor will return to the
"Turn signal buzzer" display.
If the setting change is not successful, the monitor will
show "The setting failed." then return to the "Turn signal
buzzer" display.
Door-ajar warning buzzer
It is possible to change the setting for the door-ajar warning
buzzer.
1. Press the " " function button, align the cursor with the
desired setting, and press the "SELECT" function button.
• ON: If the vehicle reaches a speed of more than 5 mph
(8 km/h) with any door or the liftgate or ajar, the tone
sounds and the door-ajar warning light flashes 4 times
then comes on steadily.
• OFF: Even if the vehicle reaches a speed of more than
5 mph (8 km/h) with any door or the liftgate or ajar, the
tone does not sound. Also, the door-ajar warning light
does not flash. (It comes on steadily.)
NOTE
The initial (default) setting is "ON".
Features and controls
N00536700090
3
3-149