Mitsubishi Endeavor Owner's Manual page 230

1. Press the " " function button, align the cursor with the
desired setting, and press the "SELECT" function button.
• A:8 seconds interval
• B:4 seconds interval
If the rear wiper switch is turned "OFF" → "ON" →
"OFF" → "ON" continuously, the rear wiper operates
continuously.
• C:8 seconds interval
If the rear wiper switch is turned "OFF" → "ON" →
"OFF" → "ON" continuously, the rear wiper operates
continuously.
• D:16 seconds interval
If the rear wiper switch is turned "OFF" → "ON" →
"OFF" → "ON" continuously, the rear wiper operates
continuously.
• E: Continuous operation
NOTE
The initial (default) setting is "A".
2. The monitor will show "The setting is progressing" while
the setting change is in progress.
When the setting change has been completed successfully,
the tone will sound once and the monitor will return to the
"Rear wiper intermittent interval" display.
If the setting change is not successful, the monitor will
show "The setting failed." then return to the "Rear wiper
intermittent interval" display.
Features and controls
3
3-141