Mitsubishi Endeavor Owner's Manual page 189

Features and controls
Stopwatch
It is possible to measure the time taken for a journey.
1. Press the "START" function button to start the stopwatch.
3
NOTE
When the stopwatch has been started, the "START" func-
tion button becomes a "STOP" function button.
2. To stop the stopwatch, press the "STOP" function button.
If you wish to subsequently start the stopwatch again
without resetting it, press the "START" function button
again.
3-100
3. To reset the stopwatch, press the "RESET" function but-
ton after stopping the stopwatch.
N00501100029
NOTE
While the stopwatch is running, pressing the "RESET"
function button does not cause the display to be reset.
If the ignition switch is turned to the "LOCK" or "ACC"
position while the stopwatch is running, stopwatch opera-
tion is suspended. When the ignition switch is next turned
to the "ON" position, the stopwatch automatically starts
running again.
The stopwatch display can show a time up to 23:59:59.
When this time is exceeded, the display returns to 0:00:00
and the stopwatch continues running.