Mitsubishi Endeavor Owner's Manual page 150

CAUTION
!
When indicator blinks, the ASC is operating,
which means that the road is slippery or that your
vehicle's wheels are beginning to slip. If this hap-
pens, drive slower with less accelerator input.
NOTE
When a spare tire has been put on your vehicle, the grip-
ping ability of the tire will be lower, making it more likely
that the indicator will blink.
CAUTION
!
If an abnormal condition occurs in the system while
driving, the and
alone will illuminate.
In these cases, follow these procedures:
indicators or indicator
CAUTION
!
[If the and indicators continuously illumi-
nate]
• If the temperature of the braking system increases
excessively due to continuous brake control on a
slippery road surface, the
will illuminate, and operation of the ASC will be
suspended to protect the brake system. (Normal
operation of the vehicle will not be affected.) Park
your vehicle in a safe place. When the temperature
in the braking system has come down, the
indicators will be turned off and the ASC will
start operating again.
• If the and indicators do not go out even
through the above procedure is followed, there
could be a problem in the system.
Stop the engine and restart the engine again and
check whether the and
the indicators go out, there is no abnormal condi-
tion.
If the and indicators remain on even after
your vehicle is driven a short distance after
restarting the engine, have the vehicle inspected by
an authorized Mitsubishi Motors dealer or a
repair facility of your choice as soon as possible.
Features and controls
and indicators
and
3
indicators go out. If
3-61