Mitsubishi Endeavor Owner's Manual page 192

Elevation/Barometer
The elevation (A) of the vehicle's present location and a
barometer (C) are shown together with a graph. For instruc-
tions on resetting the historical data in the graph, refer to "To
reset the display" on page 3-105.
NOTE
The range (B) for which historical data are shown in the
N00501300063
graph can be changed. Refer to "Graph indication" on
page 3-106.
The unit for elevation can be set to feet or meters. Refer to
"Display unit selection" on page 3-106 or "Units customi-
zation" on page 3-120.
The display can show elevations up to 12,000 feet (4,000
meters).
The altimeter displays the elevation to the nearest 200 feet
(50 meters). When the vehicle is below sea level, the ele-
vation is shown as 0 feet (0 meters).
The unit for the atmospheric pressure can be set to in.Hg,
hPa, kPa, or mb.
Refer to "Units customization" on page 3-120.
The display can show the atmospheric pressure in the
range from
(1,058 hPa).
The altimeter works by using changes in atmospheric
pressure. This means it may be affected by changes in the
weather and other conditions, and show a figure different
from the real elevation.
Fluctuations in air pressure may change the figure dis-
played even when the vehicle remains in the same place.
This is normal.
Features and controls
18.1 in.Hg (614 hPa) to
3
31.2 in.Hg
3-103