A-9 Perform Engine Maintenance - Genie Z80/60 Service Manual

June 2011
REV E
A-9
Perform Engine Maintenance
Engine specifications require that this procedure
be performed every 100 hours.
GM Models:
Required maintenance procedures and additional
engine information are available in the
GM 3.0L Operator Handbook
(GM part number 36100007).
GM 3.0L Operator Handbook
Genie part number
Perkins Models:
Required maintenance procedures and additional
engine information are available in the
Perkins 704-30 User's Handbook
(Perkins part number TPD 1336E) OR the
Perkins 804C-33 Operation and Maintenance
Manual
(Perkins part number SEBU7853-00).
Perkins 704-30 User's Handbook
Genie part number
Perkins 804C-33 Operation and Maintenance Manual
Genie part number
Part No. 88619
Section 3 • Scheduled Maintenance Procedures
Ford Models:
Required maintenance procedures and additional
engine information are available in the
Ford LRG-425 EFI Operator Handbook
(Ford part number FPP 194-302).
Ford LRG-425 EFI Operator Handbook
Genie part number
Continental Models:
Required maintenance procedures and additional
engine information are available in the
Continental TME27 Owner's Manual
(Continental part number WM10303).
77738
Continental TME27 Owner's Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fastener
located under the engine tray. Swing the engine
tray out and away from the machine.
2 Install the fastener that was just removed
through the engine tray and into the engine tray
anchor hole in the turntable.
101840
111332
Z-80/60
CHECKLIST A PROCEDURES
Crushing hazard. Failure to install
the fastener into the engine tray
anchor hole to secure the engine
tray from moving could result in
death or serious injury.
84792
111901
3 - 13