Genie Z80/60 Service Manual page 116

Section 4 • Repair Procedures
PLATFORM CONTROLS
8 Move the primary boom extend/retract joystick
full stroke in the retract direction and hold for 5
seconds, then return to the center or neutral
position.
Result: The alarm at the ground controls should
sound for a successful calibration.
Result: If the alarm does not sound, repeat
calibration procedure.
Secondary boom up/down and
extend/retract functions:
1 Turn the key switch to the off position.
2 Press and hold the enter button
ground control panel while turning the key
switch to platform controls.
3 Press the minus button
enter button twice.
4 Use the scroll button
menu until
RESET SECONDARY BOOM JOYSTICK
is displayed. Press the
DEFAULTS
select , then press the
YES
5 Do not start the engine.
6 Locate the secondary boom up/down and
extend/retract joystick.
7 Move the secondary boom up/down and
extend/retract joystick full stroke in the up/
extend direction and hold for 5 seconds, then
return to the center or neutral position.
4 - 14
on the
twice, then press the
to scroll through the
button to
button.
Z-80/60
8 Move the secondary boom up/down and extend/
retract joystick full stroke in the down/retract
direction and hold for 5 seconds, then return to
the center or neutral position.
Result: The alarm at the ground controls should
sound for a successful calibration.
Result: If the alarm does not sound, repeat
calibration procedure.
Primary boom up/down functions:
1 Turn the key switch to the off position.
2 Press and hold the enter button
ground control panel while turning the key
switch to platform controls.
3 Press the minus button
enter button twice.
4 Use the scroll button
menu until
RESET PRIMARY BOOM UP
is displayed. Press the
DEFAULTS
select , then press the
YES
5 Do not start the engine.
6 Locate the primary boom/turntable rotate
joystick.
7 Move the boom/turntable rotate joystick full
stroke in the up direction and hold for 5
seconds, then return to the center or neutral
position.
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
June 2011 July 2013
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
REV E REV F
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
on the
twice, then press the
to scroll through the
/
DOWN JOYSTICK
button to
button.
Part No. 88619