Perform Engine Maintenance (If Equipped); Torque The Lug Bolts - Ce Models - Genie TZ-50 Servise Manual

November 2004
REV A
A-3
Perform Engine Maintenance
(if equipped)
Engine specifications require that
this procedure be performed every
8 hours or daily, whichever comes
first.
Required maintenance procedures and additional
engine information is available in the Honda
GX160 Engine Owner Manual
(Honda part number 31ZH7630).
Honda GX160 Owner's Manual
Genie part number
Part No. 84577
Section 3 • Scheduled Maintenance Procedures
A-4
Torque the Lug Bolts -
CE Models
Proper axle maintenance, following the axle
manufacturer's maintenance schedule, is essential
to good axle performance and service life. Failure
to perform the maintenance procedures can lead to
poor axle performance and component damage.
1 Check each lug bolt for proper torque. Refer to
97228
Section 2, Specifications.
Required maintenance procedures and additional
axle information is available in the KNOTT Axle
Service Manual (KNOTT part number P005).
KNOTT Axle Service Manual
Genie part number
Genie TZ-50/30
CHECKLIST A PROCEDURES
Axle specifications require that this
procedure be performed initially
after 50 km, or 50 km after a
wheel change.
84443
3 - 7